News

Published on Nov 9, 2016 Honda CX500 Cafe Racer build by Joker Machine at 2016 SEMA Torco Racing Oils and Fuels Booth. Quick walk around. Websites: Oils and Fuels: http://Torco.com Builder: http://JokerMachine.com Video: http://VaporTrailProduction.com

Joker Machine GP Throttles

Our newly restored 1990 Suzuki GSXR750 will be at most AHRMA races this year. Billy Hamill from Hagon Shocks USA will be racing it throughout the 2016 season. Good luck at the track.  

The event on October 23rd at El Mirage dry lake was canceled do to rain. The next and last event of the year at El Mirage is November 12th to 13th. All being well hopefully we can put up some good numbers. Since the last time we ran the bike we’ve made some significant changes. … Continue reading "Update: 2015 Speedway Land Speed Record Bike"

Joker Machine Speedway Long Track Jawa, Bonneville Motorcycle Speed Trial Bike. 500cc modified fuel or M-AF class record, 145.22 set by Eriksen, BH in 1978. This is a long term record, 37 years. Rider Billy Hamill

In Lake Havasu all-terrain vehicles are a must. Our first project bike is a 2015 Suzuki DR-Z400. To install Joker Machine Viewtech 1 Mirrors we used our Metric Adapter. Then we custom made a bracket to mount turn signals that mount with a 8mm or 5/16 diameter mounting screw. The bracket we made will work … Continue reading "2015 Suzuki DR-Z400 Project"

We started making a few parts for our 1974 Honda CB200T build. The newest part is our CB tank emblems. Really easy installation. We also used our CB gas cap and made a one-off tank insert.

I believe this is a Honda RS500 single cylinder that started life as a XR600 motor, mounted in a custom Hagon Shocks manufactured all aluminum chassis. It sat on a wall in England for over 20 years. It has recently been reassembled and updated by Joker Machine to meet current AHRMA rules and technical specifications. … Continue reading "Hagon Shocks Road Racer Ready for Action"

Joker Machine Motorized Bicycle #1: Obviously New To The Motorized Bicycles world, my brother got me hooked on these cruiser bikes after he had built one, and I ended up building this bike (a 2011 Felt Slater), for the last 4 months with the use  of our Cad/Cam systems and CNC machines. I used a Honda over head cam GC160 industrial motor (commonly found in pressure washers … Continue reading "Joker Machine Motorized Bicycle #1: Felt Slater"

Matt shown returning from a ride on the Felt Slater with Honda GC160 motor in it…..says he when 46 mph!!!

The Caswell worked great! I filled the tank with water this morning to the top (this bike holds approximately: 3 1/4″ quarts by the way) Here is the tape I used on the holes.(super sticky stuff – worked really good!) All I need to finish now is: paint job, the chain idler set-up and the seat post … Continue reading "Bicycle Project 2/27/2012"